An access controller is a professional element for the protection of perimeters and gates. They are located in safe and hidden places, allowing the connection of the readers, which are placed in the visible place of the installation and identify the user who wants to access, as well as the connection to the electronic locks, which will be activated if the user is allowed access.
This controller supports readers based on the Wiegand protocol, which allows the connection through direct wiring of each reader to the controller. It has 4 readers to perform entry and exit at each door and supports biometric readers, which are connected through RS485 and allow connection through BUS (cascading). By supporting RS485, it also supports OSDP on the same connector, the latter being customizable in the configuration and allowing up to 8 readers by this method.
The controllers allow to manage several doors simultaneously by means of several relay outputs. This model has 4 relay outputs, being configurable as dry contact (without voltage).
By using an access controller, it is possible to ensure certain functions, such as opening all doors when a fire signal is received or triggering an alarm when a forced door is detected. Thanks to its inputs and outputs, it is possible to manage these functions in a simpler way.
| Model | A094S |
| Capacity | Up to 50.000 users |
| Records | 100.000 registers |
| Identification modes | Card and/or password |
| Proximity card | EM (125 kHz) y MF (13.56 MHz) |
| Communication | TCP/IP and RS485 |
| Outputs | 4 x relay outputs, 4 x auxiliary outputs, 4 x 12V/800mA, 4 x OSDP OUT outputs |
| Inputs | 4 x Wiegand 26/34/58, 13 x auxiliary (door sensor and push button), 4 x RS485/OSDP IN, 1 x tamper |
| Advanced features | Anti-passback (configurable via web component or via Cloud, in Office Project) |
| Mode of operation | Local network and/or via cloud in different networks |
| Firmware updates | Remote with cloud via installer account or via web browser locally |
| Power | Power supply (DC 12 V / 1 A max.) with two-pole circuit breaker included, connected to 220 VAC |
| Material | SGCC high hardness steel |
| Temp. operation | -10 ºC ~ +55 ºC |
| Dimensions | 365 (W) x 340 (H) x 85 (D) mm |
| Weight | 3000 g |
