A stand-alone access control device combines both a controller and a reader in a single unit. It identifies users, verifies their access permissions, and operates the electronic lock through its built-in relay.
The device supports multiple identification methods, including MIFARE cards or key fobs (13.56 MHz), NFC, Bluetooth, QR code scanning, and biometric facial recognition. Temporary QR codes can also be generated through the SmartPlus mobile application to provide limited-time access.
With an IP65 weatherproof rating, the unit is suitable for outdoor installations.
Through the Akuvox Cloud, administrators can configure users, schedules, and access groups, as well as manage advanced settings such as relay activation times and reader response durations.
| Model | A05C |
| Access control | Door opening with facial recognition, MF card 13.56 MHz, NFC, BLE and QR, with records Facial recognition and QR not supported simultaneously |
| Capacity | Even 20.000 faces and 20.000 cards |
| Records | 50.000 registers |
| Facial recognition verification time | < 0.2 sec |
| Facial recognition accuracy | > 99.7% |
| Screen | 5" IPS LCD full color |
| Outputs | Wiegand OUT, 1 relay and RS485 |
| Inputs | Wiegand IN, 1 of pushbutton and 1 of tamper |
| Remote access | SmartPlus cell phone application or configuration via WEB browser |
| Image sensor | Dual 2 Megapixel CMOS camera with infrared and light sensor, with anti-spoofing technology and mask detection |
| Audio | Loudspeaker for opening messages |
| Network interface | Ethernet 10/100 BaseT |
| Mode of operation | Local network and/or via cloud in different networks |
| Firmware updates | Remote with cloud via installer account or via web browser locally |
| Material | Plastic |
| Degree of protection | IP65 |
| Temp. operation | -20 ºC ~ +60 ºC |
| Dimensions | 192 (H) x 88 (W) x 27.5 (D) mm |
| Power | DC 12 V / 1000 mA máx. / IEEE802.3af PoE |
| Weight | 1100 g |
